GoogleCustom Search

2006 Benelli Pepe 50

Benelli Pepe 50

Technical data;

  • Engine - single cylinder, 2 strokes, with lamellar intake in the crankcase
  • Bore x Stroke - 40 x 39,2 mm
  • Displacement - 49,2 cc
  • Carburettor - Dellorto PHVA 12 mm. diam
  • Lubrication - separate, with automatic mixing
  • Ignition - electronic, with capacitive discharge
  • Start-up - electric and kick-start, with automatic starter device
  • Cooling - air cooled
  • Transmission - primary belt, final gears
  • Clutch - automatic centrifugal
  • Gears - automatic converter
  • Frame - double single beam, in high resistance ALS steel tubes, welded in robotized block with cataphoresis treatment
  • Front suspension - telescopic fork
  • Front fork - diam. 28 mm
  • Rear suspension - engine acting as an oscillating swing-arm
  • Rear shock absorber - oleopneumatic shock absorber
  • Front brake - disk, 220 mm diam
  • Rear brake - drum, 110 mm diam
  • Tyres - front 2.50x16", rear 2.75x16"
  • Wheels - light alloy, with 7 spokes "petal" design, with different front and rear hubs
  • Dimensions

  • length - 1875 mm
  • width - 710 mm
  • height without rearview mirror - 1020 mm
  • wheelbase - 1260 mm
  • seat height - 740 mm
  • Dry weight - 81 kg
  • Tanks capacity - fuel: 7,5 litres (reserve 1,5 litres), oil: 1,2 litres (reserve 0,2 litres)
  • (Technical data are referred to the Italian version)

    Pepe 50 LX Technical data;

  • Engine - single cylinder, two strokes, with lamellar intake in the crankcase
  • Bore x Stroke - 40 x 39,2 mm
  • Displacement - 49,2 cc
  • Carburettor - Dellorto PHVA 12 mm. diam
  • Lubrication - separate, with automatic mixing
  • Ignition - electronic, with capacitive discharge
  • Start-up - electric and kick-start, with automatic starter device
  • Cooling - air cooled
  • Transmission - primary belt, final gears
  • Clutch - automatic centrifugal
  • Gears - automatic converter
  • Frame - double single beam, in high resistance ALS steel tubes, welded in robotized block with cataphoresis treatment
  • Front suspension - telescopic fork, rod diam. 28 mm, wheel travel: 80 mm
  • Rear suspension - engine acting as an oscillating swing-arm; oleopneumatic shock absorber, wheel travel: 68 mm
  • Brakes - front: disc, 220 mm diam. Rear: drum, 110 mm diam
  • Tyres - front 2.50 x 16", rear 2.75 x 16"
  • Wheels - light alloy, with 7 spokes "petal" design, with different front and rear hubs
  • Dimensions;

  • length - 1875 mm
  • width - 710 mm
  • height without rearview mirror - 1020 mm
  • wheelbase - 1260 mm
  • seat height - 740 mm
  • Dry weight - 81 kg
  • Tanks capacity - fuel: 7,5 litres (reserve 1,5 litres), oil: 1,2 litres (reserve 0,2 litres)
  • (Technical data are referred to the Italian version)