GoogleCustom Search

2006 Benelli TRE-K 1130

Benelli TREK 1130 Benelli TREK 1130

Technical Data;

  • Engine - 4 stroke, 3 cylinders in line, tilted forwards 15, fitted with anti-vibration countershaft
  • Bore x stroke - 88 x 62 mm
  • Engine Displacement - 1130 cc
  • Compression ratio - n.d.
  • Cooling system - liquid, served by two electrofans
  • Oil cooling system - with water-oil heat exchanger
  • Distribution - chain driven double head cam shaft with 4 valves per cylinder
  • Lubrication - wet sump
  • Max power/rpm - 92 kW at 9000 rpm
  • Max torque/rpm - 115 Nm at 6250 rpm
  • Carburation - electronic injection with 1 injector per cylinder
  • Ignition - single coil inductive discharge electronic ignition
  • Clutch - wet clutch
  • Gearbox - 6-speed extractable
  • Transmission - straight toothed primary gear, chain driven secondary
  • Frame - mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings
  • Subframe - aluminium die-cast
  • Suspension - front: Marzocchi 50 mm diameter "upside down" fork damping,rebound and spring pre-load adjustment. Rear: ASD steel tube trellis swingarm with Extreme Technology single shock absorber with adjustable rebound and spring pre-load
  • Wheels - die-cast aluminium alloy front 3.5" x17", rear 6.00"x17"
  • Tyres - Tubeless, radial; Front: 120/70 x 17", rear: 180/55 x 17"
  • Brakes: Brembo; Front: twin floating disk, 320 mm
  • diameter, with 4 piston caliper; rear: single disk, with twin piston caliper

    Dimensions;

  • wheelbase - 1514 mm
  • seat height - 838 mm
  • Dry weight - 205 kg