GoogleCustom Search

The 2006 Victory Hammer

Click on an image for large images and more information.

Victory Hammer Victory Hammer

Overview;

The first thing you'll notice about the 2006 Victory HammerT is that you can't help but notice the 2006 Hammer. It could be the monster 250 mm rear tire specially designed by Dunlop and the super-wide fender that watches over it. It may be the wicked custom-inspired paint job, deep saddle or V-bar that demands a more aggressive riding position. Look closer. Maybe it's the beefy 100/6 Freedom V-Twin. Or the dual front BremboŽ brakes. Or, quite possibly, it's the notion that as good as the Hammer looks on the outside, it was designed and built to aggressively outperform its competitors on the inside. Besting rival bikes in balance, power and overall braking. Or maybe the Hammer is so completely undeniable for all the reasons above.

Features;

  • Detachtable rear seat cowl
  • 100 CI Freedom V-Twin engine with 6-speed overdrive transmission
  • Dual Brembo front disc brakes
  • Inverted cartridge telescopic fork
  • Aggressive riding V-bar
  • Technical Specification;

  • Engine Type - 4-stroke 50° V-Twin
  • Cooling System - Air/Oil
  • Displacement - 100 cu in/1634cc
  • Bore x Stroke - 101x102mm
  • Compression Ratio - 9.8:1
  • Valve Train - Single overhead camshafts with 4 valves per cylinder, hydraulic-adjusting cam chains, hydraulic lifters
  • Fuel System - Electronic Fuel Injection with 44mm throttle bodies
  • Fuel Capacity - 4.5/17.0 U.S. gallons/liters
  • Exhaust - Staggered slash-cut dual exhaust with common volume
  • Oil Capacity - 5.0qts/4.75ltr
  • Charging System - 38 amps max output
  • Battery - 12 volts/18 amp hours
  • Primary Drive Gear - drive with torque compensator
  • Clutch - Wet, multi-plate
  • Transmission - 6-speed Overdrive constant mesh
  • Final Drive - Carbon Fiber Reinforced Belt

    Brakes;

  • Front Brake - Dual 300mm floating rotor with 4-piston caliper
  • Rear Brake - 300mm floating rotor with 2-piston caliper

    Dimensions;

  • Length - 92.7/2355 in/mm
  • Wheelbase - 65.7/1668.8 in/mm
  • Seat Height - 26.4/669.3 in/mm
  • Ground Clearance - 5.8/148 in/mm
  • Rake/Trail - 32.9°/5.57/141.5 in/mm
  • Dry Weight - 657/298 lbs/kg
  • GVWR - 1165/528 lbs/kg

    Suspension;

  • Front Suspension - Inverted cartridge telescopic fork, 43mm fork tube, 5.1in/130mm travel
  • Rear Suspension - Single, mono-tube gas, forged and cast aluminum with rising rate linkage swing-arm, 3.9in/100mm travel, preload adjustable spring

    Tyres;

  • Front Wheel - 18x3.0in
  • Rear Wheel - 18x8.5in
  • Front Tyre - 130/70R18 Dunlop Elite 3
  • Rear Tyre - 250 40-R18 Dunlop Elite 3

    Colors;

  • Solid Colors Black, Indy Red, Supersonic Blue
  • Multiple Colors Flame Yellow with Tribal Tattoo, Nuclear Sunset with Tribal Tattoo

    *All specs are for standard Victory Models. Specs may change with the addition of custom order options. Seat height reflects 180 lb. operator weight. Prices listed are MSRP for stock solid black model. California Models pricing will require additional fee for fuel emissions canister. Alternate paint options or additional options may increase price. Victory reserves the right to change specifications at any time without incurring obligation. Prices exclude dealer setup, shipping, taxes, title and licensing and are subject to change. Dealer prices may vary.