GoogleCustom Search

2006 Aprilia RSV 1000 R Factory MY '06

Aprilia RSV 1000 R Factory MY '06 Aprilia RSV 1000 R Factory

The RSV 1000 R Factory is an enhanced version of the RSV 1000 R MY '06, the world's top twin-cylinder supersport. The V60 Magnesium engine and the new RSV 1000 R chassis combine with special ultra-light materials and the world's best production components to bring the RSV 1000 R Factory up to a previously unknown level of excellence on the track.

The Aprilia RSV 1000 R Factory is the utmost expression of Aprilia's technological and sporting heritage.

Here is a bike designed for those who demand maximum performance on the track. Yet, like all previous RSV 1000 R models, the new Factory still sells at a surprisingly low price. Just like its predecessors, the new Factory brings you the best motorcycle technology in the world at a rock bottom price. Nowhere else will you find this level of equipment for such a low outlay.

The Factory is an RSV 1000 R that has been pushed beyond the excellence barrier, cleverly modified and equipped with only superlative components. The important details that distinguish the Factory from the standard RSV 1000 R are:

  • Fully adjustable Íhlins rear monoshock
  • Adjustable Íhlins steering damper fitted as standard
  • Gold painted, forged aluminium wheels
  • Carbon parts kit fitted as standard
  • Rider's seat with non-slip racing upholstery
  • Frame finished in gold
  • Pirelli SuperCorsa Pro 120/70 - 190/55 ZR 17 tyres
  • The Aprilia RSV 1000 R Factory is equipped with a large number of world-beating components for maximum prestige. Many components and solutions have been taken directly from the world of racing.

    The result is truly impressive in terms of design and manufacturing quality. The RSV 1000 R Factory stands apart not only from other twin-cylinder machines, but from all other supersports. The Factory is the perfect balance between quality, technology, high-tech components and finish. In short, the Factory is the best you can get and comes at the lowest price possible.

    All the technical improvements introduced on the 2006 RSV 1000 R have naturally also been implemented on the Factory, but the Factory boasts state-of-the-art components too.


    Even the V60 Magnesium engine that powers the Factory has benefited from many improvements introduced to boost performance and achieve Euro 3 homologation at the same time. The new engine puts out 105.24 kW (143 HP) at 10000 rpm and develops a maximum torque of 103 Nm at 8,000 rpm. The exhaust system now has external catalytic converters that are installed nearer the collector pipes to cut activation time. The Factory is homologated to Euro 3 standards as a result, meaning lower emissions than ever before.


    The Factory has the same super-light frame as the RSV 1000 R. Only the gold finish is different, giving the bike a more aggressive look. The swingarm is the same too, but is polished instead of painted for greater wear resistance.


    The 43 mm upside-down Íhlins Racing fork is titanium nitride (TiN) coated for maximum smoothness. Its advanced design with longer sleeves and shorter fork bottoms reduces load at two critical points, the slide bush and the stanchion to fork bottom joint). Wheel travel is 120 mm. Like all top racing forks, the Íhlins allows precision adjustment of compression and rebound damping as well as spring preload.

    The fork has new, forged aluminium mounting blocks to enable radial calipers to be fitted.

    The Íhlins Racing rear monoshock comes directly from Aprilia's competition experience. It incorporates a separate piggy back nitrogen cylinder and provides adjustments for spring preload, compression and rebound. A characteristic unique to Aprilia is that the length of the monoshock can be adjusted directly from the unit itself to vary the height of the bike's rear end. Perfect suspension setup can therefore be achieved for all riding styles and all track characteristics


    Top supersports demand top quality brakes. The RSV 1000 R Factory is at the cutting edge of technology, and is equipped with Triple Bridge, radial caliper front brakes developed by Aprilia in conjunction with Brembo.

    The rear brakes are Brembo too, and have a 220 mm stainless steel disc and a caliper with two 32 mm pistons.

    The front and rear braking circuits both use aeronautical metal braid hoses to eliminate the pressure variations associated with conventional rubber brake lines, guaranteeing maximum braking precision.


    What places the Aprilia RSV 1000 R Factory in a class of its own is the care taken in its design and manufacture and the attention paid to every single component on the bike. The result is increased performance, better feel and greater ridability, with reduced weight and a quality and finish that no other bike can equal.

    An exclusive two chamber steering damper from Íhlins Racing's competition range is fitted as standard. The damper is adjustable to adapt steering response to all possible riding conditions.

    Extensive use of carbon components makes the bike far lighter as well as more refined. The mudguards and various fairing parts are made of extremely light woven carbon composite. The RSV 1000 R Factory also features a steering pin in aluminium instead of steel to help reduce weight.

    The Factory's exclusive forged wheels deserve special mention. These are one of the most distinctive features of the bike, not just in appearance, but in technical specifications too.

    They are forged in Anticorodal 6061 aluminium using an 8,000 ton hydraulic press.

    This manufacturing technique produces wheels that are totally free from the defects and porosity that can always occur in conventional casting processes, and gives exceptional mechanical characteristics.

    Finite element analysis was used to identify the best possible wheel design. The result is a six spoke front wheel and a five spoke back wheel with 'Y' profile spokes forking at the rim to provide two anchor points each.

    This spoke design is not just a question of looks. It gives excellent lateral and torsional rigidity and thus helps maintain perfect wheel to suspension alignment. On the RSV 1000 R Factory everything has been designed for performance and beauty.

    The saving in weight is also exceptional. Each wheel weighs about 25% less than the lightest available wheels made using conventional aluminium casting techniques.

    Inertia is therefore also 25% lower than with cast aluminium alloy wheels.

    Almost maniacal care has been taken over the RSV 1000 R Factory with attention lavished on even the smallest details. For example, the wheels are anodised instead of painted. This has further reduced weight and ensures that these essential components keep their characteristic finish for the entire life of the bike. Even the wheels' manufacturing data has been engraved instead of embossed to remove material rather than add it, another tiny saving in weight.

    Added together, all these tiny reductions mean that the RSV 1000 R Factory achieves an amazing dry weight of only 185 kg.

    Exclusive components on the RSV 1000 R Factory;

  • "Íhlins Racing" rear monoshock, set up and optimised for solo riding, adjustable in length (as well as spring preload, compression and rebound)
  • Íhlins Racing two chamber steering damper
  • carbon fibre front mudguard
  • carbon fibre rear mudguard
  • carbon fibre fairing air vents
  • carbon fibre cockpit fairing spoilers
  • carbon fibre fairing cover
  • forged aluminium front wheel
  • forged aluminium rear wheel
  • Pirelli SuperCorsa Pro 120/70 - 190/55 tyres
  • Colurs;

    The RSV 1000 R Factory comes in stunningly aggressive Gold Black.

    Optional Accessories;

  • Akrapovic complete homologated exhaust system
  • Akrapovic homologated slip-ons
  • Ergal reverse shifter
  • Adjustable aluminium footrests
  • Tank bag
  • Electronic anti-theft system
  • Comfort passenger seat (with deeper padding and grab handles, as on the Tuono R)
  • Paddock stand
  • Akrapovic Aprilia Racing EVO6 complete racing exhaust system for racetrack use only
  • Z15 pinion for racetrack use only
  • Technical Specifications;

  • Engine - V60 Magnesium four stroke longitudinal 60░ V twin. Liquid cooling with three way pressurised circuit. Double overhead camshaft with mixed gear/chain drive; four valves per cylinder. Patented AVDC (Anti Vibration Double Countershaft).
  • Fuel - Unleaded petrol.
  • Bore and stroke - 97 x 67.5 mm.
  • Displacement - 997.62 cc.
  • Compression ratio - 11.8 : 1.
  • Maximum power at the crank - 105.24 kW (143 HP) at 10,000 rpm.
  • Maximum torque at the crank - 10.3 kgm (101 Nm) at 8,000 rpm.
  • Fuel system - Integrated electronic engine management system. Indirect multipoint electronic injection. 57 mm throttle bodies. 10.3 litre airbox with Air Runner air scoop.
  • Ignition - Digital electronic ignition, with one spark plug per cylinder, integrated with fuel injection system.
  • Starting - Electric.
  • Alternator - 12 V - 500 W.
  • Lubrication - Dry sump with separate steel oil tank. Double trochoidal pump with oil cooler.
  • Gearbox - Six speed. Transmission ratios:
  • 1st - 34/15 (2.27)
  • 2nd - 31/19 (1.63)
  • 3rd - 26/20 (1.3)
  • 4th - 24/22 (1.091)
  • 5th - 24/25 (0.96)
  • 6th - 23/26 (0.88)
  • Clutch - Multiple disc in oil bath with patented PPC power-assisted hydraulic control. Metal braided clutch line. Radial master cylinder.
  • Primary drive - Spur gears. Transmission ratio: 60/31 (1.935).
  • Final drive - Chain.
  • Transmission ratio - 40/16 (2.5).
  • Frame - Box section sloping twin-spar frame in aluminium alloy. Íhlins Racing adjustable double chamber steering damper with monoblock mounting.
  • Front suspension - 43 mm Íhlins titanium nitride coated upside-down fork. 120 mm wheel travel. External adjustment system for rebound, compression and preload. Shortened fork bottoms with radial caliper fittings.
  • Rear suspension - Aluminium alloy double member swingarm. Aprilia Progressive System (APS) linkages. Íhlins Racing monoshock with piggy-back cylinder, adjustable in compression, rebound, preload and length. Wheel travel 133 mm.
  • Brakes - Front: Brembo double stainless steel floating disc, ? 320 mm. Radial caliper with four 34 mm pistons and four sintered pads. Metal braided brake line. Rear: Brembo stainless steel disc, ě 220 mm. Twin 32 mm piston caliper. Sintered pads. Metal braided brake line.
  • Wheels - Forged aluminium alloy.
  • Front - 3.50 X 17".
  • Rear - 6.00 X 17".
  • Tyres - Radial tubeless.
  • Front - 120/70 ZR 17.
  • Rear - 190/55 ZR 17 (alternative: 180/55 or 190/50).
  • Dimensions;

  • Overall length - 2,035 mm
  • Overall width - 730 mm (at handlebars)
  • Overall height - 1,130 mm (at windshield)
  • Seat height - 810 mm
  • Handlebar height - 830 mm (at bar ends)
  • Wheelbase - 1,418 mm
  • Trail - 101.7 mm
  • Steering angle - 25░
  • Aprilia weight - 185 kg, dry.
  • Tank Capacity - 18 litres, 4 litre reserve.
  • Colours;

  • Gold Black